WAY Gliders COSY 2 HF, Руководство пользователя, Страница: 8 / 27

COSY 2 HF
Take the paraglider out of the rucksack, open it and spread it open with the lines on top of the underside,
posiCon the wing as if you were to inflate it. Check the condiCon of the fabric and the lines, making sure
there are no abnormaliCes. Check the maillons, which a[ach the lines to the risers, are properly closed.
IdenCfy and if necessary disentangle the lines from A, B and C risers, the brake lines and the corresponding
risers. Make sure that there are no Ces or knots.
2.3 ASSEMBLY OF THE HARNESS
Correctly place the risers on the harness karabiners. The risers and lines should not have any twists and
they should be in the right order. Check that the harness buckles are correctly locked.
2.4 TYPE OF HARNESS
The COSY 2 HF has been cerCfied on EN A with a harness according to the following rules:
• 2. DV LugGerPV §1, Nr. 7 c (LTF)
• European Standard EN1651
• European Standard EN12491
This cerCficaCon allows it to be flown with most of the harnesses on the market, even the ones that use
cocoon. We strongly recommend that you adjust the distance of the chest strap according the values used
during cerCficaCon. This varies according to the size of the chosen harness.
Small = 44 cm
Medium = 45 cm
Large = 46 cm
Incorrect adjustment can seriously affect the piloCng of the glider. A distance, which is too wide between
the karabiners, may provide more feedback but could affect the overall stability of the glider. A distance,
which is too narrow between the karabiners, would provide less feedback but also increase any risk of
developing a twist in during a large collapse.
Any change made to these specificaCons may affect the wing’s performance and reacCons. This would
therefore effect the glider’s configuraCon and would not conform to the homologaCon.
2.5 ASSEMBLY OF THE ACCELERATOR
The acceleraCon mechanism of the COSY 2 HF works when you push with your feet on the accelerator bar,
this is supplied with the equipment. On delivery the accelerator bar has not yet been installed and it is
recommended that it is fit by yourself before flight.
Most harnesses are equipped with a pre-installed acceleraCon system. When fieng any accelerator system
ensure that all preinstalled items within the harness, such as roller pulleys are used correctly. Ager fieng,
take into account that you will have to adjust the length of the accelerator lines for correct use. This will
vary according to the length of the pilot’s legs!
We recommend that you try the correct fieng of the acceleraCon system on equipment designed to do
this, most paragliding schools have this sort of equipment.
WAY Gliders COSY 2 HF–User’s Manual– version1.2, 03/01/2024
Page 8