[20]
6. DISCOVER
The
DISCOVER WINDOW
(
fig. 14
) is a fairly simple function that allows you to find WaveWare
devices on your network. This is usually your Ethernet connection if you also have a Wifi connection. When
you click the
DISCOVER
button, a list will populate containing all the IP addresses and types of WaveWare
products on your network (
fig. 15
).
Figure 14: Discover Window: OFF
Figure 15: Discover Window: ON
WEB CONFIGURATION GUIDE
CONNECTING TO THE SYSTEM
(
Note:
These methods will only work if your network is using DHCP or if the static IP settings have already
been programmed into the system. Otherwise, the IP & Network Settings will have to be set using the
WaveWare Paging Encoder Setup Software before using Web Configuration
.)
1.
Connect the paging system to the same network as the PC you will use to setup the paging system.
2.
There are 3 different ways to open up the web browser configuration page. Each one of these accomplish
the same goal so choose whichever method is best for you.
