[29]
3.
INVERT MODULATION DATA
– allows messages to be encoded with normal or inverted data encoding.
4.
MAXIMUM MESSAGES PER TRANSMISSION
– Controls how many messages are sent in a single cycle.
5.
STATION IDENTIFIER
– Issued to paging systems so the FCC knows it’s a valid paging site.
6.
STATION IDENTIFIER INTERVAL
– Sets how much time is between broadcasts of the Station Identifier.
7.
TRANSMITTER DUTY CYCLE
– Controls the amount of time the radio is active in a cycle.
STATUS
Figure 23: Status Tab
The
STATUS
tab (
fig. 23
) shows many statistics, timers, and data points associated with your paging
system.
This feature is only available to the Web Configuration
since a paging system has to be taken out
of your communications infrastructure to be examined using the serial software method.
