[10]
V9 ENCODER SETUP SOFTWARE GUIDE
When using WaveWare’s Paging Encoder Setup v9, all system communications are sent through a
serial connection. Since most PCs do not have serial ports these days,
this is accomplished by using USB
ports via a USB-Serial Adapter
.
VERSION REQUIREMENTS:
•
A Windows 8/10 PC is required to use version v9.3.xx.
•
If you are using a Windows OS older than Windows 8, please download and install version v9.2.11
•
Old/New SPS-5 software is available at:
wirelessmessaging.com/sps5-series-encoder-programming
CONNECT TO THE SYSTEM
To choose your connection and its settings, navigate to
COM PORT
>
PROPERTIES
(
fig. 5
).
Figure 5: COM Menu
After opening the
COM PROPERTIES WINDOW
(
fig. 6
), you will see 3 separate dropdown menus
that contain the settings needed to open a COM connection to your paging encoder.
Figure 6: COM Properties
