Wavetronix SmartSensor V Скачать руководство пользователя страница 63

Страница: 63 / 90

•

SmartSensor V User Guide

Editing lane names

Figure 55.

Editing lane names

Click

Edit Lane Names

In the Edit Lane Names window, enter new names for all lanes.

Click

Lane names and RTMS protocol

The RTMS protocol can report up to eight zones. By default, the

first zone is associated with the lane closest to the sensor; the

second zone is associated with the next closest lane and so on. To

map the lanes in a different order, enter the “#” sign followed by a

unique number character between 1 and 8. (Unused lanes do not

need to be named.) The other characters are ignored but may be

used for clarification purposes. Remember, a lane with the name

“#1” will be reported first in the RTMS protocol, corresponding to

zone 1; a lane with the name “#2” will be reported second, corre-

sponding to zone 2.

Note.

Lane names

can also be changed

by going to Sensor

Settings and

clicking on the

Data

Collection

tab.

Содержание SmartSensor V



























































































Результаты поиска

Содержание SmartSensor V

Отзывы:

Похожие инструкции для SmartSensor V

Бренды по названию

Популярные бренды

Wavetronix SmartSensor V, Руководство пользователя

Результаты поиска

Содержание SmartSensor V

Отзывы:

Похожие инструкции для SmartSensor V

Бренды по названию

Популярные бренды