WIFI-LPT100-B User Manual
17
/
60
User can use AT+TMODE command to switch between Transparent Mode
and HTTPD Client Mode.
4.1.1 Transparent Transmission Mode
Transparent Mode Description
The benefit of this mode is that it achieves a plug and play serial data port,
and reduces user complexity furthest. In this mode, user only need configure the
necessary parameters. After power on, module can automatically connect to the
default wireless network and server.
As in this mode, the module's serial port always working in the throughput
mode, so users only need to think of it as a virtual serial cable, and send and receive
data as using a simple serial. In other words, the serial cable of users
’
original serial
devices is directly replaced with the module; user devices can be easy for wireless
data transmission without any changes.
Transparent mode can fully compatible with user
’
s original software platform
and reduce the software development effort for integrate wireless data
transmission.
The parameters which need to configure include:
➢
Wireless Network Parameters
•
Wireless Network Name
（
SSID
）
•
Security Mode
•
Encryption Key
➢
TCP/UDP Linking Parameters
•
Protocol Type
•
Link Type
（
Server or Client
）
•
Target Port ID Number
•
Target Port IP Address
➢
Serial Port Parameters
•
Baud Rate
•
Parity (Check) Bit
•
Stop Bit
•
Hardware Flow Control
Function
Module has one serial port UART0 can transparent transmit data between
Socket.
Module has two Socket (Socket A, Socket B). When module works in
Transparent Mode, the data input through UART port of module will be transmit to