RS485 TO ETH ( B)
4 .
INSTRUCTIONS FOR USE
The UART TO ETH (B) module is used to realize the two-way transparent transmission of
data from the serial port to the Ethernet port. The user does not need to care about the specific
details, and the module completes the protocol conversion inside. The serial port side is the
serial port level data, and the Ethernet port side is the network data packet. You can specify the
work details through simple settings. The parameters can be set through the built-in webpage or
through the setting software, and the settings can be saved forever.
This chapter is the user manual for the product UART TO ETH (B). It is recommended that
users read this chapter systematically and follow the instructions to get a systemic
understanding of this product. Users can also choose the chapters they are interested in to read
according to their needs. For specific details and instructions, please refer to the subsequent
chapters.
In addition to this manual, we also provide configuration software and other materials
based on this product for user design reference download link :
http://www.waveshare.com/wiki/UART_TO_ETH_( B)_
4 . 1 . HARDWARE DESCRIPTION
Figure 3 Front view
The front view of the UA R T TO ETH ( B) serial server is shown in the figure above.
8
/
52
