Waveshare RS485 TO ETH Скачать руководство пользователя страница 3

Страница: 3 / 36

485 TO ETH (B) User Manual

www.waveshare.com

1. OVERVIEW

MQTT and JSON can be used alone or together. Among them, JSON supports Modbus

convert RTU format to JSON format.

The Main FEATURES:

1. Use the MQTT-based protocol to establish a connection with the server, and use the form

of subscription to publish data communication.

2. Support independent design and automatic collection of Modbus RTU registers.

3. Support the conversion of specific Modbus register content into JSON format and send it

regularly and actively.

4. Support adding device ID, time, and any string in JSON format.

5. Support nested writing method in JSON format.

6. Support NTP protocol, get the time automatically.

7. Support unsigned data and signed data, support decimal point representation, and

support 4-byte length data.

8. All configurations can be completed in interface configuration, and the user's independent

configuration does not need to be customized.

9. In addition to choosing MQTT, the protocol can support HTTP POST and GET methods.

2. JSON SIMPLE EXAMPLE

2.1. MODBUS RTU TO JSON

Modbus RTU to JSON can realize automatic collection of Modbus RTU tables, and

The JSON format is automatically uploaded to the cloud server.

Here we explain this usage through a specific case.

2.2. MODBUS TABLE

Suppose there is a Modbus table with a function code of 3 and an address of 1. Its

register addresses and parameter names are as follows. Where the byte length is 4, it means
that 2 registers need to be read continuously.

Содержание RS485 TO ETH





































Результаты поиска

Содержание RS485 TO ETH

Отзывы:

Waveshare RS485 TO ETH, Руководство пользователя, Страница: 3 / 36

Результаты поиска

Содержание RS485 TO ETH

Отзывы: