Waves HPSA-7100-R Series, Инструкция по установке и эксплуатации

Страница: 169 / 179

HPSA-7100-R Series Installation and User Manual 143
P/N P01- 04946 Rev C
APPENDIX D
HPSA-7100-V-KIT
Appendix D provides general information regarding the optional HPSA-7100-V-KIT which expands the
operation of the HPSA-7100-R to include a User configurable 70.7 V
RMS
or 100 V
RMS
Audio Input.
The HPSA-7100-V-KIT is a complete assembly consisting of an Interface Module, wire harness and
mounting hardware. The Interface Module is pre-wired for 70.7 V
RMS
Audio Input, however, the Module
design provides a User selectable Audio Input of either 70.7 V
RMS
or 100 V
RMS
based on a jumper setting.
Refer to the HPSA-7100-V-KIT Installation Instructions, P10-00096, for installation and configuration
details.
FIGURE D.1
AMB Board with Optional HPSA-7100-V-KIT
When using the optional HPSA-7100-V-KIT, the 70 V
RMS
and the 100 V
RMS
External Audio
Inputs will both connect from the J3 connector on the Interface Module to the J5 connector on
the AMB.