WaveRider NCL1170, Руководство пользователя

Страница: 63 / 97

6 System Reporting and Diagnostics
APCD–NC006–A 49
Output Octets 25364516
Output Unicast Packets 16759
Output Non-Unicast Packets 0
Output Discards 76
Output Errors 0
more...
Statistics For Radio
-------------------
Flags UP POINT-TO-POINT NOTRAILERS RUNNING NOARP MULTIC
AST
MTU 1552
Hardware Address 00:90:27:b1:ad:01
Administrative Status UP(1)
Operational Status UP(1)
Input Octets 25331759
Input Unicast Packets 16769
Input Non-Unicast Packets 5
Input Discards 0
Input Errors 0
Input Unknown Protocols 0
Output Octets 7441747
Output Unicast Packets 4970
Output Non-Unicast Packets 0
Output Discards 0
Output Errors 0
Table 2 Interface Statistics
Label Description
Flags Specifies the operational state and properties of the interface.
Possible flags are:
• BROADCAST: interface is for a broadcast network
• MULTICAST: interface supports multicasting
• POINT-TO-POINT: interface is for a point-to-point network
• LOOPBACK: interface is for a loopback network
• RUNNING: resources are allocated for this interface
• SIMPLEX: interface cannot receive its own transmissions
• ALLMULTI: interface is receiving all multicast packets
• DEBUG: debugging is enabled for the interface
• NOARP: do not use ARP on this interface
• NOTRAILERS: avoid using trailer encapsulation
• PROMISCUOUS: interface receives all network packets
• TX: a transmission is in progress
• UP: interface is operating
MTU Maximum transmission unit or the size of the largest packet the
interface can handle.
Hardware Address MAC address or Ethernet address of the interface.
Administrative Status Desired state of the interface. The NCL1170 supports UP and
DOWN states.
Operational Status Current operational state of the interface.