WaveRider MMT9000, Руководство по установке

Страница: 32 / 43

2: Installation
APCD-WM001-1.0 20
Ping statistics for 216.239.39.104:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 70ms, Maximum = 90ms, Average = 80ms
Ping Internet by Name
Use the following test to verify that the DNS server IP address is correctly configured in the
end-user’s PC and is operating properly:
C:\> ping www.google.com
Pinging www.google.akadns.net [216.239.39.104] with 32 bytes of data:
Reply from 216.239.39.104: bytes=32 time=72ms TTL=241
Reply from 216.239.39.104: bytes=32 time=69ms TTL=241
Reply from 216.239.39.104: bytes=32 time=76ms TTL=241
Reply from 216.239.39.104: bytes=32 time=68ms TTL=241
Ping statistics for 216.239.39.104:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 68ms, Maximum = 76ms, Average = 71ms
2.4 Post-Installation
Once a good link between the Base Station and the MMT9000 has been established, the
configuration can be completed automatically using the Automatic Remote Configuration
feature with a RADIUS Server and database in which the MMT9000 information has been
entered.
To use this feature, the network operator must update the RADIUS database for the new
modem. This can be done before the modem is installed, in which case the modem will be
automatically configured as soon as it has established a link.
The configurable items that can be included in the Automatic Remote Configuration include:
• password,
• all SNMP parameters,
• RF Frequency (including enabling Nomadic Base Station Discovery)
• number of customers.
If the Automatic Remote Configuration feature is not used, then the network operator can
connect to the MMT9000 over the air and complete the configuration.
Details on configuring a RADIUS Server or manually configuring an individual MMT9000s are
covered in the
LMS4000 Managing the Network manual or other manuals, available on the
WaveRider web-site.