background image

 

Safety instructions 

 

 

page 6 of 30 

 

Safety instructions 

Please read these safety instructions carefully. It is essential that you un-
derstand these instructions in order to use WaveU safely. 

Keep the safety instructions handy until the end of WaveU's life. 

If you have any questions or are unsure how to use WaveU, contact our 
support team immediately. 

WaveU is a plug-in card for the PCM CARD slots (ROM) of the Roland U-
110 and U-220. It serves as a replacement for the PCM cards of the Ro-
land company. 

ATTENTION! 

Only insert WaveU into the designated card slot. Make sure that the card 
is oriented correctly. 

WaveU was developed for use in private households as well as for use in 
recording studios. 

ATTENTION! 

Use outside closed rooms can cause damage to WaveU and your device. 
Use WaveU only indoors. 

Due to its design, WaveU is particularly sensitive to inappropriate force ef-
fects. 

ATTENTION! 

Do not attempt to bend, compress or twist WaveU. Never force WaveU 
into the card slot of your device. Do not drop WaveU or apply force to the 
card. 

WaveU is an electronic product. It contains state-of-the-art electronic com-
ponents and was developed and built according to the current state of the 
art.  

ATTENTION! 

Use WaveU only in rooms with room temperature and low humidity. Do not 
expose WaveU to liquids. This can damage or even destroy the electronic 
components. 

WaveU's housing protects the underlying components and serves as an 
insertion aid into the card slot. 

ATTENTION! 

Never open the card. This can destroy the card and the electronic compo-
nents. A defective housing can no longer guarantee proper insertion into 
the card slot. This can lead to malfunction or destruction of WaveU or even 
your device. 

WaveU's contacts are gold-plated to withstand mechanical demands 
longer. Nevertheless, this is a contact-based technology. 

ATTENTION! 

Even though WaveU is designed to last, try to remove WaveU from the 
card slot only when necessary.  

WaveU works with non-hazardous voltages. 

ATTENTION! 

However, you should avoid touching the gold contacts. The contacts can 
be permanently attacked by the skin grease. And don't even think about 
licking the contacts! 

Metal objects on the contacts can cause short circuits. 

ATTENTION! 

Never short-circuit the contacts! This will destroy WaveU and can cause 
you serious physical damage! 

A defective WaveU can severely damage your device. 

Содержание WaveU































Отзывы: