Wavelength Electronics WLD3343, Техническое описание и руководство по эксплуатации

Страница: 26 / 28

© 2018 www.teamWavelength.com 26
WLD SERIES LASER DIODE DRIVERS
MECHANICAL SPECIFICATIONS
WLD3343 LASER DIODE DRIVER
with heatsink and fan
with heatsink
0.87
[22.1]
0.600
[15.24]
Sym.
0.100
[2.54]
WLD3343
BOTTOM VIEW
0.01
[0.3]
0.31 [7.9]
0.48
[12.2]
0.40 [10.2]
0.07 [1.8]
1.27
[32.3]
0.900
[22.86]
0.600
[15.24]
0.100
[2.54]
1.30
[33.0]
0.20
[5.1]
1.26
[32.0]
0.33
1.28
[32.5]
0.945 [24.00]
0.945
[24.00]
2 PLS
4-40 UNC
PCB FOOTPRINT
0.125 [3.18] Thru
0.25 [6.4] DIA KEEPOUT
4 Required
0.038 [0.97] Dia Thru Hole
0.060 [1.52] Dia Pad
14 Required
0.023 [0.58] 0.023 [0.58]
0.900 [22.86]
0.945 [24.00] SQ.
0.175 [4.45]
0.100 [2.54]
WLD3343 ASSEMBLED WITH HEATSINK & FAN
All Tolerances ±5%; units in inches [mm]
The WLD3343 can be directly soldered
to a PCB or installed in a socket soldered
to the PCB. Two 7-pin SIP sockets are
required. Wavelength recommends
Aries Electronics, PN 25-0513-10.
WEIGHTS
WLD3343 0.6 oz
WHS302 Heatsink 0.5 oz
WXC 303/4 0.3 oz
PIN DIAMETER: 0.020”
PIN LENGTH: 0.126”
PIN MATERIAL: Nickel Plated Steel
HEAT SPREADER: Nickel Plated Aluminum
PLASTIC COVER: LCP Plastic
ISOLATION: 1200 VDC any pin to case
THERMAL WASHER: WTW002
HEATSINK: WHS320
FANS: WXC303 (+5 VDC)
or WXC304 (+12 VDC)
Actual fan wire configuration may be
different than shown.
Fan can be rotated on the WLD so the
location of the wires matches your PCB
layout.
Screw: 4-40 PHPH
(×0.75” w/o fan)
(×1.0” w/ fan)
Fan: 30 mm
WXC303 (+5 VDC) or
WXC304 (+12 VDC)
WHS302
Heatsink
WTW002
Thermal Washer
WLD3343
Air Flow
Heat Spreader
Screw: 4-40 PHPH
(×0.75” w/o fan)
(×1.0” w/ fan)
Fan: 30 mm
WXC303 (+5 VDC) or
WXC304 (+12 VDC)
WHS302
Heatsink
WTW002
Thermal Washer
WLD3343
Air Flow
Heat Spreader