Wavelength Electronics LAB Series Скачать руководство пользователя страница 27

27

WARRANTY & CERTIFICATION

CERTIFICATION

Wavelength Electronics, Inc. (Wavelength) certifies that this product 

met its published specifications at the time of shipment. Wavelength 

further  certifies  that  its  calibration  measurements  are  traceable  to 

the United States National Institute of Standards and Technology, to 

the extent allowed by that organization’s calibration facilities, and to 

the calibration facilities of other International Standards Organization 

members.

WARRANTY
This Wavelength software is warranted against defects in materials 

and workmanship for a period of 90 days from date of shipment. 

During the warranty period, Wavelength will, at its option, either 

repair or replace products which prove to be defective.  

WARRANTY SERVICE
For warranty service or repair, this product must be returned to the 

factory. An RMA is required for products returned to Wavelength 

for warranty service. The Buyer shall prepay shipping charges to 

Wavelength and Wavelength shall pay shipping charges to return 

the product to the Buyer upon determination of defective materials 

or workmanship.  However, the Buyer shall pay all shipping charges, 

duties, and taxes for products returned to Wavelength from another 

country.

LIMITATIONS OF WARRANTY
The warranty shall not apply to defects resulting from improper use or 

misuse of the product or operation outside published specifications. 

Warranty for the QCL instrument is invalid if the instrument cover 

has been removed for any reason. No other warranty is expressed 

or implied. Wavelength specifically disclaims the implied warranties 

of merchantability and fitness for a particular purpose.

EXCLUSIVE REMEDIES
The remedies provided herein are the Buyer’s sole and exclusive 

remedies. Wavelength shall not be liable for any direct, indirect, 

special, incidental, or consequential damages, whether based on 

contract, tort, or any other legal theory.

REVERSE ENGINEERING PROHIBITED
Buyer, End-User, or Third-Party Reseller are expressly prohibited 

from reverse engineering, decompiling, or disassembling this 

product.

NOTICE
The information contained in this document is subject to change 

without notice. Wavelength will not be liable for errors contained 

herein or for incidental or consequential damages in connection with 

the furnishing, performance, or use of this material. No part of this 

document may be translated to another language without the prior 

written consent of Wavelength.

LIFE SUPPORT POLICY
This important safety information applies to all Wavelength electrical 

and electronic products and accessories:
As a general policy, Wavelength Electronics, Inc. does not 

recommend the use of any of its products in life support applications 

where the failure or malfunction of the Wavelength product can be 

reasonably expected to cause failure of the life support device or 

to  significantly  affect  its  safety  or  effectiveness.  Wavelength  will 

not knowingly sell its products for use in such applications unless it 

receives written assurances satisfactory to Wavelength that the risks 

of injury or damage have been minimized, the customer assumes all 

such risks, and there is no product liability for Wavelength. Examples 

of devices considered to be life support devices are:

neonatal oxygen analyzers, nerve stimulators (for any 

use), auto-transfusion devices, blood pumps, defibrillators, 

arrhythmia detectors and alarms, pacemakers, hemodialysis 

systems, peritoneal dialysis systems, ventilators of all types, 

and infusion pumps as well as other devices designated 

as “critical” by the FDA. The above are representative 

examples only and are not intended to be conclusive or 

exclusive of any other life support device.

TECHNICAL SUPPORT & 

CONTACT INFORMATION

REVISION HISTORY

Document Number: 

LBV-00400 

REVISION

DATE

NOTES

A

January 2017

Initial Release

B

May 2017

Introduced TC LAB VI

C

October 2019

Introduced LDTC LAB VI

WAVELE

n

GTH

 

E L E C T R O N I C S

51 Evergreen Drive

Bozeman, Montana 59715

406-587-4910  (tel)

406-587-4911  (fax)

Sales & Tech Support

[email protected]

[email protected]

Содержание LAB Series




























Отзывы: