January 04
Page 1 of 1
GigAccess
TM
RSU
Self-Install Residential Subscriber Unit
End User Manual
1. Packing List
•
RSU900 or RSU 2.4
•
Power Supply
•
End User Manual
2. Installation
The RSU is a self-installed, plug and play unit, which requires minimum setup operations from the user.
1. Polarization
Indication
2.
ETH link led (Yellow)
3.
Air link led (Green)
4.
Received Signal Indicator Lights
5. ETH
Connector
6. Power
led
7.
DC Power Jack
1)
Figure 3-1: General Description for GigAccess™ Self Install RSU
2.1. Before You Start
2)
Make sure your computer is equipped with an Ethernet Network Interface (NIC).
3)
Make sure your computer network configuration is set up according to your Internet Service Provider instructions (typically to
automatically obtain an IP address - DHCP).
4)
Select the appropriate location for the RSU:
•
Locate the RSU near an exterior window.
•
Locate the RSU in such a way that its antenna will face your service provider Access Unit (AU). Avoid any physical obstacles,
which may block the signal.
1
4
7
6
5
3
2
