WAVE EXCITE CLASS & TREND, Руководство по техническому обслуживанию

Страница: 105 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Pagina 7.5
7.2.2. 700
AND
700SP LED V
ERSION
Figure -7.2-4
Carry out the operations described in
paragraphs: 7.1. “Display disassembly”.
Then place the display on a work bench. It is
now possible to disassemble its circuit boards:
•
The Display Board (A);
•
The C-Safe Board (B).
Figure 7.2-5
Display Board (A):
1.
Disconnect connectors
(a)
[CN2] of the
keyboard and
(b)
[CN8] of the CSafe board
from the Display board.
2.
Back off the 5 screws
(c)
with a medium
Phillips screwdriver.
3.
Remove the circuit board.
Figure 7.2-6
CSafe Board (B):
1.
Disconnect connector
(d)
[CN8] of the C-
Safe from the Display board
.
2.
Remove the circuit board
(e)
, slipping it off
from the top.
Use again the hot glue to fix the
connectors, where necessary.
To reassemble the circuit board, carry out the
above steps in reverse order