opeRation
The LMRH-101 uses IR technology to wirelessly send control signals to
the DLM system . Point the handheld remote at any IR enabled DLM device
within its range and press a button to send signals to the DLM network . To
identify an IR enabled device, look for a dark translucent lens on the face
of the device .
transmitting range
40°
32’ (10m) max.
32’ (10m) max.
Default functionality: plug n’ Go™ (pnG)
As shipped from the factory, the rocker paddle controls all loads on the
DLM local network . To change the loads that are controlled by the LMRH-
101 see UNIT ADJUSTMENT .
Button functions
Press the top of the rocker paddle
to turn load(s) ON . The blue LED on
the paddle also turns ON . Switched
loads turn ON . Dimmable loads turn
ON to the last light level set before
they turned OFF . Press the bottom
of the rocker paddle to turn load(s)
OFF .
Dimmable loads ramp down or up in response to pressing and holding the
top or bottom of the paddle . ON/OFF loads turn OFF when the ramp level
dims below 50% and turn ON when the ramp level rises above 50% .
Battery Life
To conserve battery life, the LMRH-101 shuts down 5 seconds after the
last key press unless the LMRH-101 and the DLM local network is in
configuration mode (Push n’ Learn, PnL) .
IR Lens
• Single tap: Bound
loads turn ON to
last light level
• Press and hold:
Raise light level
• Single tap: Bound
loads OFF
• Press and hold:
Lower light level
