Model No. 2, 2T and 2PEX
Ball-type Washing Machine Shutoff Valve
Installation Instructions
1. No. 2 features 1/2" solder or
5
⁄
8
" compression
adapters.
No. 2T features
1
⁄
2
" solder or male thread
adapters.
No. 2 PEX features
1
⁄
2
" PEX adapters.
2. Disassemble adapters and remove
O-rings prior to soldering.
3. Install a minimum of 3" (76mm) above
top of washing machine Ell adapters can
be orientated to top, bottom or side.
4. Pipe connections are 2
3
⁄
8
" (60mm) on
center.
IS-2-M2
Model M2 identification
shown on body casting.
Kit for No. 2-M2 consists of:
1-Side Plug O-ring
2-Adapter O-rings
4-PTFE Discs
2-Adapter Screw O-rings
2-Spindle O-rings
2-Hose Adapter O-rings
Adapter O-ring
Screw O-ring
Upper PTFE Disc
Side Plug
O-ring
Side Plug
Ball Valve
Lower PTFE Disc
Hose
Adapter
Hose Adapter
O-ring
Spindle O-ring
No. 2
3" min.
No. 2T
3" min.
ORDERING
CODE NO.
KIT NO.
FOR
SIZE
0862000
2-M2-RK
2-M2, 2T-M2, 2M2PEX
1
⁄
2
"
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can
result in death, serious personal injury, property damage, or
damage to the equipment.
Keep this Manual for future reference.
