Lync AEGIS Controller
3: USER OPERATION VIA WEB INTERFACE
L-OMM-013_A
• 4/20/2022Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
31
of
100
•
“RC01 Remote control” ENABLED
•
“RC03 Thermal request by: “DI”
Now the “RC02 Heat pump ON-OFF” parameter it is not enough to switch the unit ON/OFF.
Digital input 2 of the controller needs to be closed by an external thermostat or PLC device as well
in order to activate the unit.
3.1.5. Main Menu
The main menu is located on the left side of the web interface main screen. Click on the menu to
enter the corresponding section. Some screens display a tab interface allowing the configuration
of several sections.
The “Service” and “Manufacturer” menus are displayed only for the users with higher access level
permissions (see later).
