Lync AEGIS Controller
3: USER OPERATION VIA WEB INTERFACE
L-OMM-013_A
• 4/20/2022Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
27
of
100
3. USER OPERATION VIA WEB INTERFACE
3.1.1. Web Server Main Page (Home)
The web server can be accessed with direct ethernet connection to the unit. To access the
internal web server, type the IP address of the unit in your internet browser (the factory default is
192.168.1.160
– please refer to Appendix C if you need to change your PC's IP address
accordingly).
You will be prompted for the credentials:
Use the username “user” and the password “1” to access with the lowest authorization level.
Please refer to the “User management” section later on for additional details about the user
access levels. After successful authentication the unit main screen will be displayed, showing the
main menu on the right side and the unit current data in the central area. Alarm and warnings, if
any, are shown at the bottom of the Home page:
Alarms and
warnings area
Main menu
