Watts LFM513-5 Series Скачать руководство пользователя

Страница: 3 / 21

ES-ACV-LFM513-5 2115

Threaded = 400psi (27.6 bar)
150# Flanged = 250psi (17.2 bar)
300# Flanged = 400psi (27.6 bar)
Grooved End = 400psi (27.6 bar)

Operating Pressure

M Series Basic Valves

Pump Control Valve with Mechanical Check Feature

Full Port Ductile Iron Dual Chamber Basic Valve with Mechanical Check Feature

Y/FC

4(L)

CLOSES VALVE

OPENS VALVE

FLOW

Globe Flanged

Angle Flanged

Globe Threaded

Globe Grooved End

Angle Threaded

Angle Grooved End

Basic Valve Body Options

Standard Materials

Body and Cover:

Ductile Iron ASTM A536

Coating:

NSF Listed Fusion Bonded Epoxy

Lined

and

Coated

Trim:

316 Stainless Steel

Elastomers:

Buna-N (standard)

EPDM

(optional)

Viton™

(optional)

Nut, Spring and Stem:

Stainless Steel

Anti-Scale (Optional):

Xylan Coated Stem and Seat

Viton™ is a trademark of The Chemours Company FC, LLC

ACV Schematic - Series LFM513-5

This Watts ACV is a full port, dual chamber basic valve that incor-

porate a two-piece telescoping disc and diaphragm assembly. This

assembly is the only moving part within the valve, allowing it to open

or close as commanded by the pilot control system. The lower por-

tion of this two-piece assembly is a mechanical check feature, which

acts independent of diaphragm position or pilot control system, and

provides immediate check action when flow ceases.
When pressure is applied to the upper diaphragm chamber and

released from the lower diaphragm chamber, the valve travels to a

closed position. When pressure is applied to the lower diaphragm-

chamber and released from the upper diaphragm chamber the valve

travels to a full open position.
Watts ACV Main Valves are Lead Free. The Watts ACV piloting sys-

tem contains Lead Free* components, ensuring all of our configura-

tions are Lead Free compliant.
Globe Pattern Dual Chamber Basic Valve with Mechanical Check

Feature (

M518)

Angle Pattern Dual Chamber Basic Valve with Mechanical Check

Feature (

M1518)

Operating Temperature

Buna-N: 160°F (71°C) Maximum
EPDM: 300°F (140°C) Maximum
Viton™: 250°F (121°C) Maximum
Epoxy Coating**: 225°F (107°C) Maximum

** Valves can be provided without internal epoxy coating consult factory

Содержание LFM513-5 Series






















Результаты поиска

Содержание LFM513-5 Series

Отзывы:

Похожие инструкции для LFM513-5 Series

Бренды по названию

Популярные бренды

Watts LFM513-5 Series, Руководство пользователя

Результаты поиска

Содержание LFM513-5 Series

Отзывы:

Похожие инструкции для LFM513-5 Series

Бренды по названию

Популярные бренды