background image

8

Repair Kits

Before contacting the local FEBCO parts distributor, write down the 

following information to have on hand when placing the order. The 

serial number located on the assembly ID plate can assist in ordering 

the proper kit.

•  Item number and name. Locate the number and name of the 

item in the "Parts" section.

•  Kit number. Use the tables below to find the number of the kit 

containing the item.

•  Valve size. Verify the size of the valve that the item is to be 

used on.

•  Model number. Record the full model number found on the 

assembly ID plate.

ORDERING CODE

STYLE

SIZE

in.

mm

Complete Rubber Kit

905355

ALL

1/2 & 3/4

15 & 20

905356

ALL

1

25

905357

ALL

1 1/4 - 2

32 - 50

Kit includes all rubber parts.

Check Module Rubber Kit

905342

ALL

1/2 & 3/4

15 & 20

905343

ALL

1

25

905344

ALL

1 1/4 - 2

32 - 50

Both checks. Kit includes Items 2.2, 3.1 (qty 2), and 5 (qty 2).

Relief Valve Rubber Kit

905345

ALL

1/2 & 3/4

15 & 20

905345

ALL

1

25

905346

ALL

1 1/4 - 2

32 - 50

Kit includes Items 12, 12.1, 14, 15, 16, 18.1 (qty 2), and 20.

Single Poppet Kit

905339

ALL

1/2 & 3/4

15 & 20

905340

ALL

1

25

905341

ALL

1 1/4 - 2

32 - 50

Valve has two poppets. Kit includes Items 4 to 5.2.

LEAD FREE

*

LEAD FREE

*

LEAD FREE

*

LEAD FREE

*

ORDERING CODE

STYLE

SIZE

in.

mm

#1 Check Module Kit (inlet)

905348

ALL

1/2 & 3/4

15 & 20

905350

ALL

1

25

905352

ALL

1 1/4 - 2

32 - 50

Kit includes Items 3 to 7 for inlet check.

#2 Check Module Kit (outlet)

905347

ALL

1/2 & 3/4

15 & 20

905349

ALL

1

25

905351

ALL

1 1/4 - 2

32 - 50

Kit includes Items 3 to 7 for outlet check.

Full Relief Valve Module Kit

905353

ALL

1/2 & 3/4

15 & 20

905353

ALL

1

25

905354

ALL

1 1/4 - 2

32 - 50

Kit includes Items 12 to 17.3, 18.1 (qty 2), 20, 22, 23

LEAD FREE

*

LEAD FREE

*

* The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight.

Содержание FEBCO 860 Series













Отзывы: