background image

 

7

 

ES-A-ACV-LF920GD  2115 

© 2021 Watts

LEAD FREE

*

* The wetted surface of this product contacted by consumable water 

contains less than 0.25% of lead by weight.

Model LFPV20C

Pressure Relief, Sustaining or 

Backpressure Pilot

Size: 

1/2

" NPT

The Model LFPV20C is a remote sensed direct acting, diaphragm 

actuated Pilot that is used on various configurations of Automatic 

Control Valves.
It is normally held closed by the force of the adjustable spring 

setting above the diaphragm. It modulates toward an open posi-

tion when control pressure, exerting force below the diaphragm, 

exceeds the spring setpoint, and modulates toward a closed 

position when the control pressure falls below the spring setpoint. 

The LFPV20C senses control pressure through a tapped port 

below the diaphragm. The large diaphragm-to-seat ratio allows 

it to open and close within tight pressure tolerances, accurately 

positioning the Main Valve.
Turning the adjustment screw clockwise raises the control set-

point. Turning the adjustment screw counterclockwise lowers the 

control setpoint.
The LFPV20C is equipped with one 

1/2

" NPT inlet and outlet port 

and a 

1/4

" NPT side sensing port located on the power chamber. 

The 

1/4

" side sensing port is used to monitor upstream or down-

stream pressure as required by specific valve function. 

Body Material:

 

      Lead Free Copper Silicon Alloy 

Seat:

 

   316 

Stainless 

Steel

Elastomers:

 

   Buna-N 

(standard) 

 

   Viton™ 

(optional) 

 

   EPDM 

(optional)

Inlet Pressure Rating:

    400psi (27.6 bar) maximum

Adjustment Rating:

      20-200psi (1.4 - 13.8 bar) (standard)  

 

      0-30psi (0 - 2.1 bar) (optional) 

 

      100-300psi (6.9 - 20.7 bar) (optional) 

 

      200-450psi (13.8 - 31.0 bar) (optional)

Specifications

Model LFPV20C

Sense Port

Outlet

Inlet

1

2

3

4

5

7

9

10

11

8

6

12

13

14

16

17

18

19

20

21

15

17

7.30

1.00

3.50

Item 

Description

1

Adjusting Screw

2

Jam Nut

3

Spring Housing

4

Spring Guide

5

Spring 

6

Cap Screw

7

Power Chamber

8

O-Ring*

9

Body

10

Seat

11

O-Ring*

Item 

Description

12

Nut

13

Lockwasher

14

Diaphragm Washer

15

Diaphragm*

16

Diaphragm Washer

17

O-Ring*

18

Stem

19

Retainer

20

Rubber Disc*

21

Screw

*Included in Repair Kit

Viton™ is a trademark of The Chemours Company FC, LLC

ACV Standard Components - Series LF920GD

Содержание AMES LF920GD Series






















Отзывы: