![background image](http://html1.mh-extra.com/html/watts/aerco-inn-1060n/aerco-inn-1060n_installation-operation-and-maintenance-manual_877211037.webp)
Innovation - Edge [i] Installation, Operation, Maintenance Manual
CHAPTER 3
– OPERATION
OMM-0143_A
• GF
-216
•
9/6/2019
Technical Support
•
(800) 526-0288
•
Mon-Fri, 8 am - 5 pm EST Page 37 of 170
Enter
This button allows you to finalize a selection (for instance, a selected from a
menu or from a pop-up (for example, password entry input completion).
Note, all alphanumeric data entry is entered in the touchscreen.
Fault
A red light Indicates that the Controller is in a Fault condition.
Clear
Clears a fault
– the red Fault light goes out.
If the touchscreen becomes non-responsive at any time, simply press the
CLEAR
button; this
resets the touchscreen and should clear the problem.
3.2.1 Touchscreen Button Functionality
Some of the same Soft-Key controls, as well as some additional controls, appear within the
Controller’s touchscreen. They function as follows:
TABLE 3.2.1: Touchscreen Controls
Icon
Name
Description
Previous
Takes you to the previous screen.
Home
Takes you to the touchscreen’s Main Menu (see Figure 3.3). If pressed during
a procedure, it aborts the procedure.
Left Right
The
LEFT
arrow moves to previous point in the array or list and
RIGHT
arrow
moves to next point in the array or list.
Up/Down
The
UP
arrow increases a value,
DOWN
decreases value.
Page Left
Page Right
The arrows on left and right edges of the touchscreen scroll
Page
Left
or
Page
Right
in a round-robin sequence.
Page Up
Page Down
On screens with multiple pages, the
Page Up
and
Page Down
buttons
moves up and down the pages.
Abort
The
Abort
button appears when a process may need to be exited prior to
completion.
Next
Pressing
Next
takes you to the next screen in a multi-step procedure. Some
procedures have a
Proceed
button instead.
Save
1. Pressing
SAVE
on a pop-up screen saves the entered data and returns
you to the previous screen.
2. Pressing
SAVE
on a non-popup screen saves the entered data and takes
you to the next screen.
Retry
Pressing
Retry
takes you to the previous screen and re-attempts the process
step that caused the notification message to appear.
Help
Takes you to a Help screen specific to the subject.