Watts 009 Series Скачать руководство пользователя страница 1

Страница: 1 / 12

Installation, Maintenance, & Repair

Series 009 and LF009

Reduced Pressure Zone Assemblies

Sizes:

⁄

" – 3" (8 – 80mm)

RP/IS-009

3" (80mm) 009NRS

Testing

For field testing procedure, send for IS-TK-DP/DL,

IS-TK-9A, IS-TK-99E AND IS-TK-99D.
For other repair kits and service parts, send for PL-RP-BPD.
For technical assistance, contact your local Watts

representative.

NOTE:

For Australia and New Zealand, line strainers

should be installed between the upstream shutoff valve and

the inlet of the backflow preventer.

You are required to thoroughly read all installation instructions

and product safety information before beginning the installa-

tion of this product.

FAILURE TO COMPLY WITH PROPER

INSTALLATION AND MAINTENANCE INSTRUCTIONS

COULD RESULT IN PRODUCT FAILURE WHICH CAN

CAUSE PROPERTY DAMAGE, PERSONAL INJURY AND/

OR DEATH.

Watts is not responsible for damages resulting

from improper installation and/or maintenance.

Local building or plumbing codes may require modifications to

the information provided. You are required to consult the local

building and plumbing codes prior to installation. If this informa-

tion is not consistent with local building or plumbing codes, the

local codes should be followed.

Need for Periodic Inspection/Maintenance:

This product

must be tested periodically in compliance with local codes, but

at least once per year or more as service conditions warrant.

If installed on a fire suppression system, all mechanical checks,

such as alarms and backflow preventers, should be flow tested

and inspected in accordance with NFPA 13 and/or NFPA 25.

Corrosive water conditions, and/or unauthorized adjustments

or repair could render the product ineffective for the service in-

tended. Regular checking and cleaning of the product’s internal

components helps assure maximum life and proper product

function.

WARNING

Содержание 009 Series













Результаты поиска

Содержание 009 Series

Отзывы:

Похожие инструкции для 009 Series

Бренды по названию

Популярные бренды

Watts 009 Series, Установка, обслуживание и ремонт

Результаты поиска

Содержание 009 Series

Отзывы:

Похожие инструкции для 009 Series

Бренды по названию

Популярные бренды