Watts Industries AMES Silver Bullet 4000SS Series Скачать руководство пользователя страница 1

Reduced Pressure Zone
Assemblies & Reduced
Pressure Detector
Assemblies

Sizes: 2

1

/

2

" – 6" (65 – 150mm)

• Installation
• Service
• Repair Kits
• Maintenance

For other repair kits and service parts, send for
Ames Repair Parts Price List, PL-A-RP-BPD.

For technical assistance, contact your local
Ames representative.

IMPORTANT: Inquire with governing
authorities for local installation requirements.

NOTE: For Australia and New Zealand, line
strainers should be installed between the
upstream shutoff valve and the inlet of the
backflow preventer.

Its important that this assembly be tested
periodically in compliance with local codes,
but at least once per year or more as service
conditions warrant. If installed on a fire
sprinkler system, all mechanical checks,
such as alarm checks and backflow
preventers, should be flow tested and
inspected internally in accordance with NFPA
13 and NFPA 25.

4000SS

www.amesfirewater.com

A Division of Watts Water Technologies, Inc.

Limited Warranty:

Ames Fire & Waterworks (the “Company”) warrants each product to be free from defects in material and

workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within
the warranty period, the Company will, at its option, replace or recondition the product without charge.

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH
RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY HEREBY
SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty,
and the Company shall not be responsible for any incidental, special or consequential damages, including without limitation, lost
profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs
resulting from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water
conditions, chemical, or any other circumstances over which the Company has no control. This warranty shall be invalidated by
any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation
of incidental or consequential damages. Therefore the above limitations may not apply to you. This Limited Warranty gives you
specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to
determine your rights.

SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT

BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

Series 4000SS

Содержание AMES Silver Bullet 4000SS Series

Страница 1: ...RANTIES EXPRESS OR IMPLIED THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty and the Company shall not be responsible for any inc...

Страница 2: ...from the flood level to the bottom of the assembly 4 The 4000SS and 5000SS are not recommended for pit instal lations Where necessary an Air Gap drain may be connected to the relief valve to minimize flooding of the surrounding area Flooding may cause a cross connection Be sure to contact local code authorities for proper installations 5 If installing on fire protection system be sure to purge air...

Страница 3: ...and O rings for damage nicks and debris If not damaged gently close the clapper If dam aged install a new Cam Check assembly and or O ring or shutoff disc 4 Before reinstallation of check assembly thoroughly clean O ring groove and lubricate with F D A approved lubricant Insert and thread 2 Cam Check first and then 1 Cam Check 2 Cam Check should be tightened by inserting a long screwdriver between...

Страница 4: ...ibbed edge of the diaphragm inward grasp the sleeve with the ribbed edge up and slide the sleeve down over the piston assembly as shown in Figure 8 5 While still holding the sleeve slide it up over the diaphragm and using your thumb index finger position the bead of the diaphragm so that it wraps over the outside of the rib on the top of the sleeve so that the sleeve is held by the diaphragm Now p...

Отзывы: