wattio THERMIC, Руководство пользователя

Страница: 39 / 56

39
Remind that the app is available for free download at the Play store for Android and the app
store for iOS.
Once finalized the set-up Wizard, verify the correct performance of the Thermic.
In case of an incorrect initializing or if necessary, the Reset
is pressed as follows, by a clip. The initial configuration will
be restored.
Remind that the signal
requirements must be
respected between the GATE
and the THERMIC. You can
double check the signal range
status on the mobile app.
Remind that you can add PODs to the system to increase your
systems network range and add automation functionalities to the
system.
Maintenance
The user will be notified with an on screen signal that the Thermic runs out of battery. From that
moment will stop working, so it is advisable to change the batteries.
To replace batteries, before opening, the Thermic must be disconnected from the power supply.
It is highly recommended to switch off the electric supply system to proceed.
To remove the cover, just press the right side snap, without forcing it.