Watt Stopper PW-203 Скачать руководство пользователя страница 5

Auto ON 

DIP 8

 

OFF 

for Relay 1

DIP 9

**

 OFF 

for Relay 2

Alerts

The PW can provide audible and/or visible alerts as a warning before the load 
turns OFF.

Turning ON Loads (ON Mode)

The relays are programmed independently for either Auto ON or Manual ON. In 
either mode, the load can be turned ON or OFF using the ON/OFF button.

Unit will beep at one minute*, at 30 seconds and at 10 
seconds before turning OFF load. When Walk-Through 
is active, the unit beeps three times at 10 seconds 
before the load goes OFF. 
*If Visible Alert is also ON, the one-minute time-out 
warning beep is replaced by the visible alert.

Audible 
Alerts

(DIP 7 ON)

When only one minute is left in the time delay, the load 
connected to the relay turns OFF for one second. This 
provides a one minute warning before the load(s) are 
turned OFF by the sensor.

Visible Alert

(DIP #6 ON)

No Visible Alerts 

(DIP 6 OFF)

No visible warnings provided.

No audible warnings provided.

No Audible Alerts

(DIP 7 OFF)

With an ON Mode DIP switch in the OFF position, the load turns 
ON and OFF automatically based on occupancy. If the load is 
turned OFF manually, Presentation Mode operation applies. This 
prevents the load from turning ON automatically after it was 
deliberately turned OFF. Pressing the button to turn lights ON 
returns the sensor to Auto ON mode. 

**

  Switch 9 default is ON for Manual ON functionality of Relay 2 to comply with 

California Energy Commission Title 24 bi-level switching requirements.

Manual ON

DIP 8

 

ON 

for Relay 1

DIP 9

**

 ON 

for Relay 2

With an ON Mode DIP switch in the ON position, the occupant 
must press the ON/OFF button to turn ON the load. The sensor 
keeps the load ON until no motion is detected for the selected 
time delay. There is a 30 second re-retrigger delay. If occupancy 
is detected during the delay, the sensor turns the load back ON. 
After the re-trigger delay elapses the ON/OFF button must be 
pressed to turn ON the load.

Call 800.879.8585 for Technical Support

 

  

Relay 

Default ON Mode 

DIP switch # 

Setting

 PW-203 

Auto ON 

OFF

  

Manual ON 

ON

Содержание PW-203











Отзывы: