3.
Using the
∧
/
∨
keys, enter a character.
4.
There are 20 character slots. Press ‘NEXT’ to confirm your character and to move onto the next.
Press ‘PREVIOUS’ to return to the last character slot.
5.
Once you have filled the character slots press ‘FINISH’. This will return you to the General settings
screen.
19.10 Failsafe speed
A failsafe speed is a dedicated speed the pump uses if an error occurs. Use this to prevent the pump
stopping in the event of an error.
Example:
disconnect the RJ45 cable from the pump while running on Ethernet/IP™ mode and the
pump will error.
•
If failsafe speed is enabled,the pump will run at the failsafe speed and the network error message
will display.
•
If failsafe speed is not enabled, the pump will stop running and the network error message will
display.
Once the error is acknowledged, the pump will run as normal.
68
m-730en-en-08.1
