Watkiss Automation PowerSquare 200, Руководство пользователя

Страница: 37 / 80

5 - Error Conditions, Problems and Solutions - Message List
Watkiss PowerSquare™200 User Manual
33
Message List
Message Information Reference
AXES MOVING Some of the machine axes are
moving. This message clears
when the adjustment is complete.
BOOK CYCLE TIME TOO
LONG The printer has delivered the sets
faster than the books can be
made.
To decrease the book cycle time,
adjust the machine settings:
• decrease the number of
FORMS
• decrease the number of
STITCHES
• decrease the TAMPER TIME
Bridge axis moving The bridge axis is moving. This
message clears when the adjust-
ment is complete.
BRIDGE INFEED COVER
OPEN The bridge infeed cover is open.
The machine will not operate until
the cover is closed. See page 41.
BRIDGE MOTOR STALL Check for a paper jam in the con-
necting bridge. Clear the jam and
continue. See page 41.
CHECK THE TRIM BIN The trim bin is either open or full.
Check the trim bin. Empty the trim
bin if necessary.
COVER OPEN A safety cover is open. The
machine will not operate until the
cover is closed.
DRIVE MOTOR STALL There is a paper jam. Check the
machine and correct the error.
Endlay axis moving The endlay axis (size adjustment)
is moving. This message clears
when the adjustment is complete.
ERROR IN TRIM AREA There is an error at the trimmer.
Check the machine for a paper or
book jam.
FLOW ERROR - BRIDGE There is an error at the connecting
bridge. Open the connecting
bridge cover and check for a paper
jam. See page 41.