INSTALLATION GUIDELINES
PAGE
1
OF
2
| UPDATED ON 8.17.2018
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
STYLE No. HNWS02
Henry Metal Round 2 Leg Washstand
29” x 20” x 31¾ “
TECHNICAL DETAILS:
DETAIL
SPECIFICATION
ADJUSTABLE LEVELERS/FEET
YES
DIAMETER OF LEGS/TUBES
1 ½ ” [38mm]
PRIMARY MATERIAL
Brass
RECOMMENDED ROUGH-IN SUPPLY HEIGHT
21”
RECOMMENDED ROUGH-IN SUPPLY SPREAD
9”
RECOMMENDED ROUGH-IN WASTE HEIGHT
19”
STORAGE CAPACITY
28½” x 17⅝”
TOP ATTACHMENT METHOD
Silicone
WEIGHT
#LBS
IMPORTANT:
To ensure this product is installed properly, you must read and follow these guidelines.
The owner/user of this product must keep this information for future reference.
Install adequate blocking or position over a stud to properly secure the fixture.
Inspect this product, upon receiving, to ensure it is the correct model and you have all parts
required for proper installation.
Slab top, fittings and Lavatory sold separately.
This product must be installed by a professional licensed contractor. Be sure your installation
conforms to all federal, state, and local codes.
Take all necessary precautions to ensure that this product is protected during installation.
Ensure the floor is level and the weight of this product will be adequately supported.
The use of certain plumber’s putty may stain stone or tile surfaces.
29” [737mm]
Ø 3
1/16
” [78mm]
31
3/
4
” [
80
6m
m
]
27
7/8
” [469mm]
Ø 1
1/2
” [38mm]
25
15/16
” [659mm]
18
1/
16
” [
46
9m
m
]
18
7/8
” [469mm]
25
13
/1
6
” [
65
5m
m
]
10
3/
8
” [
26
4m
m
]
15
” [
38
2m
m
]
5
5/
16
”[1
51
m
m
]
20” [508mm]
