STYLE No. HNKM70, HN70KM
Henry One Hole Gooseneck Kitchen Faucet
with Pull-Down Spray and Metal Lever Handle
INSTALLATION GUIDELINES
PAGE 1 OF 6 | UPDATED ON 5.9.2018
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
IMPORTANT:
To ensure this product is installed properly, you must read and
follow these guidelines.
The owner/user of this product must keep this information for
future reference.
This product must be installed by a professional licensed
contractor.
Be sure your installation conforms to federal state, and local
codes. In the State of Massachusetts, all installations must comply
with the rules and regulations set forth within 248 CMR.
Inspect this product to ensure you have all the parts required for
proper installation. Product is sold partially assembled but shown
fully disassembled for illustrative and service purposed only.
Use only a strap wrench or protected/smooth-jaw wrench on any
finished surface.
The use of certain plumber’s putty may stain stone or tile surfaces.
If further assistance is required, please contact Product Support at
1-800-927-2120 Monday through Friday, 8am – 6pm EST.
Refer to the separate Service Parts Documents for available
replacement parts.
TECHNICAL DETAILS:
DETAIL
SPECIFICATION
ADJUSTABLE VERSUS FIXED SPRAY
ADJUSTABLE
HANDLE TURN ANGLE
QUARTER TURN
INLET CONNECTION
3/8” COMPRESSION CONNECTOR HOSES †
RESTRICTED MAXIMUM FLOW RATE 2.2gpm
[8.3L/min]
SPOUT REACH
7-9/16” [193mm]
SPOUT SWIVEL
YES
SPRAY HOSE LENGTH
49” [1.2m]
SPRAY INCLUDED IN UNIT
YES
WATER PRESSURE RANGE
20psi [1.5 bar] MIN
85psi [6.0 bar] MAX
WATER PRESSURE RECOMMENDED
45psi [3.0 bar]
†
UK Style No.,
HN70KM
is supplied with 2 BSPP adapters, assembly required.
MOUNTING
SURFACE
Ø 1-3/8"
[35mm]
FITTINGS
HOLE
1/4" MIN
[6mm]
3-1/4" MAX
[83mm]
DECK
THICKNESS
