Item
Part No.
Description
1
830-2001
0-30 PSI Gauge
2
805-0224
O-Ring for Waste Adapter
3
425-1928
Waste Adapter Fitting
4
WVS003
Multi-Port Valve Assembly
5
505-1970
Collar Wrench
6
718-1960
Split Nut - Sand Filter
7
819-0015
1/4" Screw -20 PPH x 2"
8
820-0013
Serrated Hex Nut - 1/4" - 20
9
805-0435
O-Ring
10
502-2011
Sand Fill Guide
11
505-1960
Threaded Sleeve for Split Nut
Item
Part No.
Description
12
515-1601
16" Sand Filter Body
515-1901
19" Sand Filter Body
515-2001
22" Sand Filter Body
515-2601
26" Sand Filter Body
13
505-2020
Drain Assembly
14
505-2030
Drain Cap Assembly
15
820-9001
Washer for Support Bolt (1)
16
819-0020
3/8" Support Bolt -16 x 1 1/4" Hex (1)
17
218-6680
Support Mount
18
672-1000
Equipment Base
19
820-9001
Pump Washer (4)
Item
Part No.
Description
20
819-9001
Screw No.12 x 3/4" Hex Washer (4)
21
3410310-15 3/4 HP - 1-Speed - Center Discharge
22
711-4000
1 1/2" Gasket
23
319-2160
6" Pump Trap Body
24
319-3230
6" Basket Assembly
(not shown)
25
805-0436
O-Ring - Lid
26
319-3260
6" Trap Lid
27
417-6151
1 1/2" Hose Fitting with 3/8" Barb
28
872-0010
Hose Clamp - Stainless Steel (6)
29
872-9002
Corrugated Hose - 6 ft. (2)
30
872-9001
Corrugated Hose - 3 ft. (1)
--
810-0092
Instruction Sheet
REPLACEMENT PARTS
MOTOR DOES NOT START:
• Make sure motor is plugged in
• Circuit breaker in OFF position
• Thermal Overload in tripped position
• Wiring installation incorrect
• Incorrect line voltage
• Defective wiring
THERMAL OVERLOAD TRIPS:
• Low voltage
• Wiring Installation incorrect
• Dual voltage pumps mis-wired
• Inadequate ventilation
NO WATER FLOW:
• Obstruction of suction or return line
• Clogged impeller
• Clogged basket
• Dirty sand
EXCESSIVE PUMP NOISE:
• Worn bearings
• Suction line clogged
INADEQUATE FILTERING:
• Pump incorrectly mounted
• Hose fitting partially closed
• Clogged trap basket
• Sand level too low
• Inadequately cleaned system
• Chemical imbalance
• Inadequate system pressure
TROUBLESHOOTING
Sand Fill Chart:
16" Model - 50 lbs.
19" Model - 100 lbs.
22" Model - 150 lbs.
26" Model - 200 lbs.
See Instructions for
proper valve alignment
30
20
18
2
24
28
29
22
28
29
28
28
27
4
2
3
28
1
5
10
12
13
21
23
2
15
16
17
6
(to attach body to base)
19
7
8
9
11
26
25
20
27
14
Multi-Port Valve Ports
From
Pump
To Pool
810-0092.0209
© 2009 Waterway Plastics
