PLEASE NOTE:
Watersnake accepts no liability for personal injury or property damage caused while
fitting this motor accessory. Please wear appropriate protective clothing and eyewear/face
protection. Avoid contacting and/or inhaling fibreglass dust or aluminium shavings.
INSTALLATION
1.
Install the sensor unit at a distance of more than 1m from the trolling motor.
Position toward the stern of the boat.
2.
The arrow on the cover should point towards the bow of the boat.
3.
The axis of the two screw holes should be parallel to the keel of the boat.
4.
Install the sensor on a fl at horizontal surface. Do not place on a tilted surface.
5.
Ensure that there are no high-current power wires or iron-containing objects within 15cm of the sensor.
6.
Stainless steel screws are the best option for fi xing (do not use screws containing iron).
BOW
STERN
