Waters Xevo G2 QTof, Руководство оператора, обзор и техническое обслуживание, Страница: 93 / 248

Removing O-rings and seals 5-17
Removing O-rings and seals
When performing certain maintenance procedures, you must remove O-rings
or seals from instrument components. An O-ring removal kit is provided with
the instrument.
O-ring removal kit:
To remove an O-ring:
Use the tools as aids to pull the O-ring or seal from its groove.
Tip:
If the O-ring or seal is not going to be reused, you can use the forked end
of tool 1 to impale the O-ring or seal and aid removal.
Cleaning the instrument case
Use a soft cloth, dampened with water, to clean the outside surfaces of the
mass spectrometer.
Caution:
When removing an O-ring or seal from a component, be careful
not to scratch the component with the removal tool.
Caution:
Do not use abrasives or solvents to clean the instrument’s case.
Tool 1
Tool 2