Waters 2475, Руководство оператора, Страница: 129 / 228

Scanning spectra 3-57
Scanning new spectra
To scan new spectra:
1. Select SCAN (Shift, Chart Mark).
Scan list
2. From the scan list, select 1 New scan, or use and to scroll through
the list.
The detector displays the first of four parameter screens.
3. Press Next to advance through the New scan parameter screens.
4. On the first New scan screen, specify the type of scan:
• For a sample scan, press 1, or press Enter to display the list.
• For a zero-scan, press 2, or press Enter to display the list.
The detector displays three additional screens. All parameters appear on
the first New scan screen for both a zero and a sample scan. You can
return to screen 1 to review the parameter values for either scan type by
pressing Next from the Run screen.
Tip:
You can press Run/Stop from any New scan screen.
5. Press Run/Stop.