Unpacking the Pump
33
2
2.2 Unpacking the Pump
The pump is shipped in one carton that contains the following items:
•
Waters 1525µ or 1525EF Binary HPLC Pump
•
Startup Kit
•
Bottle holder
•
Certificate of Structural Validation
•
Certificate of Functional Performance
•
Waters 1525µ and 1525EF HPLC Pump Installation and Maintenance Guide
To unpack the pump:
1.
Open the carton and remove the Startup Kit and other items from the top of the
carton.
2.
Remove the top packing tray and foam insert, then slide the box up and off the unit.
3.
Lift the pump off the shipping pallet.
4.
Carefully set the pump down and remove the foam packing material from both ends
of the pump.
5.
Check the contents of the Startup Kit against the Startup Kit parts list to confirm that
all items are included.
6.
Verify that the serial number on the inside left frame of the pump matches the serial
number on the Certificate of Functional Performance. Keep the Certificate of
Functional Performance and the Certificate of Structural Validation with this guide
for future reference.
7.
Inspect all items for damage. Immediately report any shipping damage to both the
shipping company and your Waters representative. Contact Waters Technical
Service at 800 252-4752, U.S. and Canadian customers only. Other customers, call
your local Waters subsidiary or Waters corporate headquarters in Milford,
Massachusetts 01757 (U.S.A.). Refer to the Waters Licenses, Warranties, and
Support document for complete information on reporting shipping damages and
submitting claims.
