Considerations specific to the Waters 2432 Conductivity
Detector
Warning:
To avoid electric shock, do not remove protective panels from
system modules. The components within are not user-serviceable.
Warning:
To avoid injury from electrical shock or fire, and damage to the
equipment, do not place vessels containing liquid atop the workstation or ancillary
equipment or otherwise expose those units to dripping or splashing liquids.
Prohibited:
To avoid equipment damage caused by spilled solvent, do not
place reservoir bottles directly atop an instrument or device or on its front
ledge. Instead, place the bottles in the bottle tray, which serves as
secondary containment in the event of spills.
FCC radiation emissions notice
Changes or modifications not expressly approved by the party responsible for
compliance, could void the user's authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Electrical power safety notice
Do not position the instrument so that it is difficult to disconnect the power cord.
Equipment misuse notice
If equipment is used in a manner not specified by its manufacturer, protections
against personal injury inherent in the equipment’s design can be rendered
ineffective.
Safety advisories
Consult the "Safety advisories" appendix in this publication for a comprehensive list
of warning advisories and notices.
December 7, 2015, 715004730 Rev. A
Page iv