WATERS CORPORATION 2424, Руководство оператора, Страница: 103 / 196

Programming methods and events 3-39
3. Enter a number from 1 to 10 (inclusive), and press Enter. A brief
message (“Storing * as method n ”) appears. When the display returns to
the Method choice list, the method number you selected appears within
the method icon. That method remains active until you retrieve another
method or reset the detector to default conditions (Method *).
Retrieving a method
To retrieve a previously stored method
1. Return to the Method choice list by pressing METHOD.
2. Press 3 Retrieve a method. The last method number stored or retrieved
appears in the method number slot box.
3. Specify the number of the method you wish to retrieve and press Enter.
Result:
A brief message (“Retrieving method n ”) appears.
4. When the display returns to the Method choice list, the method number
you specified appears within the method number icon.
Viewing events within a method
To view timed and threshold events that make up a stored method
1. Retrieve the method. Once you enter the method number to retrieve, the
Method choice list appears with the method number displayed within
the method number icon.
2. Press 1 to view the timed events or 2 to view the threshold events of the
method.
3. If you change a timed or threshold event within a method, the asterisk
appears (Method *) indicating that the method (*) is no longer the same
as the stored method you retrieved in step 1. You can then store the
method containing the altered event(s) in the same storage slot.
Resetting a method
Resetting a stored method is a two-step process. First, you reset the current
conditions to the defaults; and then you save the defaults in one of the storage
locations. The table on page 3-15 lists the parameter default settings.