©2018 Water Pik, Inc.
S I D E K I C K
™
This device is compatible with voltages of 100 – 240 VAC, 50/60 Hz
Water Floss
B.
Assemble unit
as shown.
A.
Connect power cord to
power supply and to base
unit. Plug into electrical
outlet.
A.
Slide to lowest
pressure setting.
C.
Fill reservoir with warm water and
place it firmly on the base. Slide pressure
to high, point tip into sink, turn power
ON
until water flows. Turn power
OFF
.
B.
Place tip in mouth and close lips
enough to prevent splashing. Turn power
ON
allowing water to flow from mouth into
the sink. Increase pressure to your liking.
C.
Aim water at the gumline at
a 90 degree angle. Follow the
gumline and pause briefly
between teeth.
Fill
Power
Power
For a how-to video, product
registration, and additional support
visit waterpik.com/WelcomeWF
Step 2
Unit Prep
Step 1
Quick Start Guide – WF-04
Low
High
High