Fill
Replace
Insert
NO
Gap
Low
PAUSE
High
This device is compatible with global voltages of 100–240VAC, 50/60Hz.
Remove the reservoir from
base and fill with lukewarm
water.
Replace the reservoir onto
the base,
PRESSING DOWN
FIRMLY
to ensure full seating.
Prior to Very First Use of Unit, Prime Unit:
Set pressure control dial on base to
high
, point
the handle and tip into sink. Turn unit
ON
until
water flows from the handle, turn unit
OFF
.
Press tip firmly into
handle. When tip is
properly inserted there
should be no gap
between handle and
colored tip ring.
1
Prepare the Reservoir:
Select and Insert Tip:
2
3
4
continued on back
Prime Unit (First Time Use Only):
Adjust Pressure and Pause Control:
You can temporarily stop
water flow by pressing
the pause button on
the handle.
For first time
users, adjust
pressure control
to
lowest position
.
Gradually increase
pressure as you prefer.
Model WP-120
QUICK START GUIDE
