Waterous Pressure Governor, Инструкция по установке и эксплуатации

Страница: 13 / 53

13
|
53
Safety Introduction Product Overview Installation Operation
Pressure Governor—Rear Connectors
Pin Pin Name Name Description Description
1 Engine (+) reference Analog engine control positive reference
2 Throttle ready Throttle ready interlock input active high
3 High Idle High idle control input active high
4 OK to pump OK to pump interlock input active high
5 Discharge sensor ground Discharge sensor ground
6 Discharge sensor reference Intake 5VDC power
7 Discharge sensor signal Intake sensor output signal
8 Engine signal Analog engine control signal
9 Engine (–) reference Analog engine control negative reference
10 Pump engage Pump engaged interlock input active high
11 Delay relay common Delay relay common input
12 Delay relay normally open Delay relay normally open output
Connector—Deutsch DT15-12PA
Plug—Deutsch DT-06-12SA