Figure 1
Figure 2
1. Close the main intake valve. Turn on
the tap to release the pressure in the
pipe.
2. Remark two 1‘’. Brass PEX-A Expansion
Barb x 1‘’ MNPT Male Adapter(not
included in the box). Wrap more than 10
turns of Teflon tape on the external
thread of the Adapter. Screw one end of
the external thread into the thread of the
1” FNPT filter bottle and tighten it with a
wrench.
(Figure 1)
Notice:
If necessary, you can also
configure two additional Shutoff Valve
and Pressure Gauge to connect, the
effect is shown in the figure:
(Figure 2)
1’’. Brass PEX-A Expansion Barb x 1‘’
MNPT Male Adapter
Step 2: Measure the system and cut the pipe
(Figure 3)
Determine location and water flow direction for the system. Cut off the appropriate
length of PEX pipe. Fix the pipe on the system with two 1’’. Stainless Steel PEX Barb
Pinch Clamps. Pay attention to the water inlet direction, and do not install it in the
opposite direction. You can also use an expansion ring to fix the pipe.
Step 3: Fix the whole house filter
(Figure 4)
Securely mount the whole house filter bracket and ensure the system is level.
Notice:
Fit pipe hanger (not included) on water INLET and OUTLET side for addition-
al support.
X
Figure 3
Figure 4
3
1
2
4
5
6
7
8
Press Gauge
Shutoff Valve