Assembly instructions
HEATKILLER® GPU-X³ GTX570 V2 LT
The unique design of the HEATKILLER® GPU-X³ GTX570 V2 LT guarantees outstanding performance. A cooling
performance in the range of current high-end CPU coolers, a flat design as well as top quality materials
distinguishes the new GPU-X³ series.
The bottom plate consists of pure copper. The cooling structure of the GPU is extremely fine-tuned and offers a
higher performance than most CPU coolers. The thin base ensures even more performance.
HEATKILLER® GPU-X³GTX 570 V2 LT
Dimensions (LxBxH)
186,0 x 117,0 x 11,5mm
Weight
850g
Material (bottom/cover)
CU / VA
Connections
G ¼ Zoll
Temperature-resistant
up to
80°C
Compatible with
Nvidia GeForce GTX570 Version 2
Note: You will find coloured assembly instructions in Pdf format in the service area of our homepage.
( www.watercool.de )
Attention: The Watercool company assumes no liability for any damages caused to hardware. If uncertain hire a
specialist to carry out the modification, or use our modification service.
By disassembling the original cooler you may cause the manufacturer´s warranty to become void, if uncertain
contact the manufacturer of the Graphic card.
1. Preparation of the Graphic card
Remove the original heat sink and all remnants of the thermal pads. Place the pre-cut pads on the graphics card
as illustrated. Normally, both sides of the pads are covered with a protective film which must be removed before
the installation.
Make sure to place the pads on the right components.
No.1 – thermal pad 0,50mm height (color purple)
No.2 – thermal pad 1,00mm height (color light blue)
Apply the thermal compound to the GPU area evenly.
