Watec WAT-910HX, Руководство пользователя

Страница: 5 / 28

2.OSD MENU OPERATION 2.OSD MENU OPERATION 2.OSD MENU OPERATION 2.OSD MENU OPERATION
The functions and parameter settings of WAT-910HX can be changed by OSD(On Screen Display).
When operating OSD, Jog Switch is used.
See the picuture below for the detailed function of 3 keys.
The operation portion of the Jog Switch
When using 1)UP&RIGHT/2)DOWN&LEFT, slide 1)UP&RIGHT/2)DOWN&LEFT button upward/downward.
1)UP&RIGHT : There are mainly two functions. One is to move the cursor upward on OSD Menu, and the other
is to adjust and change the functions on each list (defined as rightward direction).
2)DOWN&LEFT : There are mainly two functions. One is to move the cursor downward on OSD Menu, and the
other is to adjust and change the functions on each list (defined as leftward direction).
3)ENTER : Mainly to execute/set the selected list and function on OSD Menu.
Typically, 1)UP&RIGHT/2)DOWN&LEFT function work as up-and-down movement. Other than that, when pressing
3)ENTER on one of the lists, the cursor will start to blink, then, the buttons' functions changes to
right-and-left movement.
When pressing 3)ENTER again under the above condition, the cursor will stop blinking. Then, the buttons' functions
return to work as up-and-down movement.
The symbol "
↵
" will be on some lists on OSD Menu to indicate that there are Sub Menus or selectable options by
pressing 3)ENTER.
2)DOWN&LEFT
(Slide
downward)
1)UP&RIGHT
(Slide upward)
3)ENTER
(Push)
5