Assembly of the TACOS
WAT-910BD Housing v2
Page 1
1) Circuit Diagram
2) Assembly of PCB
a)Tools Required.
Only simple hand tools are necessary to complete the assembly of the PCB.
- Soldering Iron and solder
- Needle nose pliers
- Wire clippers/trimmers
- Maybe a multimeter to test the resistor values
- Maybe a magnifying glass to read the resistor values, see
http://www.hirophysics.com/Labsheet/resis-codes/resis-codes.html
Later you will need
- Phillips Head screwdrivers
- bottle of Super-Glue
- 1.5mm Allen key
Appendix A) Lists the Contents of the WAT-910BD-TACOS Kit
Appendix B) Photo of the contents of the WAT-910BD Carton
b) Inspect PCB
The PCB is designed and manufactured specifically for the TACOS-WAT-
910BD camera project.
It is of double sided construction and all holes are through plated to make
soldering easy. The side the Nano microcontroller is fitted has a large
ground plane.
It is designed with markings and values to help aid correct assembly.
Shown is TACOS BDvA, meaning version A - meaning the PCB design
was right first time
☺
