Watchguard DV-1 guide, Руководство пользователя, Страница: 92 / 142

UPDATING DV-1 FIRMWARE SUPERVISOR/ADMINISTRATOR FUNCTIONS
92
The SUPERVISOR DELETE PIN confirmation screen is displayed.
Press
DELETE PIN
to confirm, or
Cancel
to exit without deleting
the Supervisor PIN .
The system firmware is designed to be updated by simply inserting a
CD or DVD containing the updated firmware files.
NOTICE
Please ensure that all DVDs that are needed have been written
and ejected prior to the upgrade.
To update the firmware in your DV-1, follow these steps:

If you receive the update by email, copy all the distribution files
to a CD or DVD+RW disc.

Power up the DV-1.

Verify that all pending video has been burned to a DVD.

When no pending video remains, press the
STOP/QUIT
key for
2 seconds to eject any CD or DVD.

Power the DV-1 unit off and then back on.

Insert the CD or DVD containing the updated firmware files into
the DVD drive and wait for the system to detect the update file
(may take 30-60 seconds). After detection, the
UPGRADE
SOFTWARE screen is displayed.

Press the
YES
key to start the firmware update.
After about 5 to 10 minutes, the system will reboot.
NOTICE
There may be as many as 4 reboots before the entire upgrade
process finishes.