TROUBLESHOOTING
HARD DRIVE QUICK FORMAT
109
NOTICE
Supervisor access is required to format the hard drive from the
Supervisor
menu. Administrator access is required to format the
hard drive from the
back door
.
If certain key system files on the hard drive are corrupted, the hard
drive may need to be wiped clean (formatted) in order to return the
system to operability.
A
Quick Format
cleans the hard drive and corrects any problems
caused by data corruption.
All video/audio data, configuration
files, officer names, and Supervisor passwords are deleted
, and
it takes about one minute. WatchGuard recommends performing a
Quick Format
before performing a
Full Format
to see if that fixes
the problem.
Errors titled
HARD DRIVE MAINTENANCE
generally indicate
data corruption on the hard drive. Data corruption is usually caused
by a power loss or a power interruption if the backup battery (UPS)
is depleted.
WARNING!
This operation will cause all video on the hard drive to be
lost!
Press
MENU
>
SUPERVISOR MENU
>
Manage DVD and
Hard Drive
>
Hard Drive Maintenance
>
Quick Format
.
If prompted to login, follow the steps listed in
on page 78.
Содержание DV-1 guide
