WatchGuard AP432 Hardware Guide
EU Declaration of Conformity
This device complies with the essential requirements of the RED Directive 2014/53/EU. The following
test methods have been applied in order to prove presumption of conformity with the essential
requirements of the RED Directive 2014/53/EU:
EN 62368-1:2014+A11:2017
Safety of Information Technology Equipment (ITE)
EN 55032:2015+A11:2020
Electromagnetic compatibility of multimedia equipment - Emission requirements.
EN 55035: 2017+A11:2020
Electromagnetic compatibility of multimedia equipment — Immunity Requirements
EN 61000-3-2:2019
Limits for harmonic current emissions.
EN 61000-3-3:2013+A1:2019
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional
connection.
EN 62311:2008
Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0 Hz - 300 GHz).
EN 301 489-1 V2.2.3 (2019-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements
EN 301 489-17 V3.2.4 (2020-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data
Transmission Systems
EN 300 328 V2.2.2 (2019-07)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band
modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the
RED Directive
EN 301 893 V2.1.1 (2017-05)
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN
covering the essential requirements of article 3.2 of the RED Directive
WatchGuard Technologies, Inc.
24
