Watchguard 4RE, Руководство пользователя

Страница: 79 / 118

Microphones control
If the 4RE DVR has been configured to allow it, you can change the state of a camera by
touching the corresponding camera button.
Important! The 4RE DVR requires that one camera always be active.
See Adjusting your cameras on page 21
Microphones control
You can use the Microphones control to review or change the states of the
microphones connected to the 4RE system.
Lit LED numbers below the Microphones control show which microphone
connections are active in the system.
To see which microphones are connected to the system and their current state:
n
Press the Microphones control
Buttons appear on the Display screen representing each microphone.
The available states for each microphone depend on how your 4RE DVR is configured. The
possible states include:
Active : The microphone is recording to the hard drive ( √ )
Inactive : The microphone is NOT recording to the hard drive ( )
If your configuration allows access, you can change the state of a microphone by touching the
button on the screen.
Note: WatchGuard recommends that you set microphone states in the
configuration file.
For more information ...
See Pairing the wireless microphone with base on page 18
See the WatchGuard Wireless Microphone User Guide
4RE In-Car Video User Guide 4.0.6
WGD00089 Revision D 79